ST3303 PRO 18.4 INCH 24 LED Light Bar ST3303 PRO 18.4 INCH 24 LED Light Bar Stedi THE ULTIMATE LIGHT BAR For almost a decade, the name STEDI has stood for cutting-edge design and market-leading performance. The ST3303-PRO is an aggregation of all things that have made us the globally distributed, coveted brand born right here in Australia. Unquestionably, ST3303 PRO sits at the pinnacle of the STEDI offering. A pure expression of capability and design that converges with brutal performance, making the all-new ST3303 PRO unmistakably STEDI. A NEW REALM OF PERFORMANCE Every good story starts with CREE LEDs. So, we commissioned CREE XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn't sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with tighter source improves the optic and emitter size relationship We've effectively increased the optic diameter by 40% without physically increasing it. The result is huge light volume and tremendous beam throw. NOW, ARE YOU SITTING DOWN? Where others stop, we get started. The current draw is enormous, and quite literally unlike anything else on the market. The 60 LED variant draws 36 amp at 13.6v & @ 12.5v 40 amp. Have we got your attention yet? Now, you must, without any exception, we repeat, you must use the heavy-duty, dual relay (yes dual relay!), dual fused wiring harness we supply. The current is so intense, the 40 LED and 60 LED bars have two separate power cables (yes two separate power cables!) on either side of the light bar, and two separate breathers (yep two!) to deal with the enormous current draw. The Nitty Gritty. Registered Design: 201915829. CREE XLamp XP-L HI undomed LEDs using CREEs breakthrough SC5 Technology RFI and EMI suppression circuit. Guaranteed to not interfere with Radio or GPS Equipment IP68 - Submersible to 3m Single High Current Deutsch DTP-2 25A connector 32mm diameter parabolic reflectors Spread and Spot beam pattern 4mm thick 304 stainless steel side brackets included. Cast Alloy adjustable sliding bracket included. Nitto Denko Breather with PTFE microporous membrane Very heavy-duty Smart Plug & Play ADR compliant Wiring Harness. (Switch, Dual Fuse, Dual Relay and HB3 and H4 Piggyback Adaptors)include Registered Design: 201915829 Tech Specs   LED Manufacturer CREE XPL Hi LED COUNT 24 VOLTAGE 9V - 32V CURRENT DRAW (AMPERES) 11.9a @13.6v LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN RAW LUMENS 26,280Lm EFFECTIVE LUMENS 13,440Lm PEAK INTENSITY (CANDELA) 435,600cd HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink LIFESPAN 50,000 FLOOD BEAM 50 SPOT BEAM 9 INGRESS PROTECTION IP68 OPERATING TEMP -40C ~ +150C WEIGHT 2.250kg What's Included ST3303 PRO 24 LED 18.4 Inch Light Bar Easy Fit High Beam Wiring Harness with H4 & HB3 adapters to High Beam 2 x Lower Mountings Brackets with Stainless Steel Fasteners 2 x 4mm thick Stainless Steel Brackets 2 x Orange End Caps 2 x Grey End Caps

ST3303 PRO 18.4 INCH 24 LED Light Bar

Code: LED3303-PRO-24L
$369.99
In Stock
Add to Wishlist
  • OPEN PAY AVAILABLE

  • GURANTEED PARTS FIT

  • INTERSTATE DELIVERY

THE ULTIMATE LIGHT BAR

For almost a decade, the name STEDI has stood for cutting-edge design and market-leading performance. The ST3303-PRO is an aggregation of all things that have made us the globally distributed, coveted brand born right here in Australia.

Unquestionably, ST3303 PRO sits at the pinnacle of the STEDI offering. A pure expression of capability and design that converges with brutal performance, making the all-new ST3303 PRO unmistakably STEDI.


A NEW REALM OF PERFORMANCE

Every good story starts with CREE LEDs. So, we commissioned CREE XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn't sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with tighter source improves the optic and emitter size relationship We've effectively increased the optic diameter by 40% without physically increasing it. The result is huge light volume and tremendous beam throw.

NOW, ARE YOU SITTING DOWN?

Where others stop, we get started. The current draw is enormous, and quite literally unlike anything else on the market. The 60 LED variant draws 36 amp at 13.6v & @ 12.5v 40 amp. Have we got your attention yet? Now, you must, without any exception, we repeat, you must use the heavy-duty, dual relay (yes dual relay!), dual fused wiring harness we supply. The current is so intense, the 40 LED and 60 LED bars have two separate power cables (yes two separate power cables!) on either side of the light bar, and two separate breathers (yep two!) to deal with the enormous current draw.

The Nitty Gritty.

  • Registered Design: 201915829.
  • CREE XLamp XP-L HI undomed LEDs using CREEs breakthrough SC5 Technology
  • RFI and EMI suppression circuit. Guaranteed to not interfere with Radio or GPS Equipment
  • IP68 - Submersible to 3m
  • Single High Current Deutsch DTP-2 25A connector
  • 32mm diameter parabolic reflectors
  • Spread and Spot beam pattern
  • 4mm thick 304 stainless steel side brackets included.
  • Cast Alloy adjustable sliding bracket included.
  • Nitto Denko Breather with PTFE microporous membrane

Very heavy-duty Smart Plug & Play ADR compliant Wiring Harness. (Switch, Dual Fuse, Dual Relay and HB3 and H4 Piggyback Adaptors)include

Registered Design: 201915829

Tech Specs

 

LED Manufacturer CREE XPL Hi
LED COUNT 24
VOLTAGE 9V - 32V
CURRENT DRAW (AMPERES) 11.9a @13.6v
LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN
RAW LUMENS 26,280Lm
EFFECTIVE LUMENS 13,440Lm
PEAK INTENSITY (CANDELA) 435,600cd
HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink
LIFESPAN 50,000
FLOOD BEAM 50
SPOT BEAM 9
INGRESS PROTECTION IP68
OPERATING TEMP -40C ~ +150C
WEIGHT 2.250kg

What's Included

  • ST3303 PRO 24 LED 18.4 Inch Light Bar
  • Easy Fit High Beam Wiring Harness with H4 & HB3 adapters to High Beam
  • 2 x Lower Mountings Brackets with Stainless Steel Fasteners
  • 2 x 4mm thick Stainless Steel Brackets
  • 2 x Orange End Caps
  • 2 x Grey End Caps

THE ULTIMATE LIGHT BAR

For almost a decade, the name STEDI has stood for cutting-edge design and market-leading performance. The ST3303-PRO is an aggregation of all things that have made us the globally distributed, coveted brand born right here in Australia.

Unquestionably, ST3303 PRO sits at the pinnacle of the STEDI offering. A pure expression of capability and design that converges with brutal performance, making the all-new ST3303 PRO unmistakably STEDI.


A NEW REALM OF PERFORMANCE

Every good story starts with CREE LEDs. So, we commissioned CREE XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn't sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with tighter source improves the optic and emitter size relationship We've effectively increased the optic diameter by 40% without physically increasing it. The result is huge light volume and tremendous beam throw.

NOW, ARE YOU SITTING DOWN?

Where others stop, we get started. The current draw is enormous, and quite literally unlike anything else on the market. The 60 LED variant draws 36 amp at 13.6v & @ 12.5v 40 amp. Have we got your attention yet? Now, you must, without any exception, we repeat, you must use the heavy-duty, dual relay (yes dual relay!), dual fused wiring harness we supply. The current is so intense, the 40 LED and 60 LED bars have two separate power cables (yes two separate power cables!) on either side of the light bar, and two separate breathers (yep two!) to deal with the enormous current draw.

The Nitty Gritty.

  • Registered Design: 201915829.
  • CREE XLamp XP-L HI undomed LEDs using CREEs breakthrough SC5 Technology
  • RFI and EMI suppression circuit. Guaranteed to not interfere with Radio or GPS Equipment
  • IP68 - Submersible to 3m
  • Single High Current Deutsch DTP-2 25A connector
  • 32mm diameter parabolic reflectors
  • Spread and Spot beam pattern
  • 4mm thick 304 stainless steel side brackets included.
  • Cast Alloy adjustable sliding bracket included.
  • Nitto Denko Breather with PTFE microporous membrane

Very heavy-duty Smart Plug & Play ADR compliant Wiring Harness. (Switch, Dual Fuse, Dual Relay and HB3 and H4 Piggyback Adaptors)include

Registered Design: 201915829

Tech Specs

 

LED Manufacturer CREE XPL Hi
LED COUNT 24
VOLTAGE 9V - 32V
CURRENT DRAW (AMPERES) 11.9a @13.6v
LENS MATERIAL OPTICAL GRADE, HARD COATED LEXAN
RAW LUMENS 26,280Lm
EFFECTIVE LUMENS 13,440Lm
PEAK INTENSITY (CANDELA) 435,600cd
HOUSING MATERIAL A360.0 Cast face plate, extruded Aluminum heat sink
LIFESPAN 50,000
FLOOD BEAM 50
SPOT BEAM 9
INGRESS PROTECTION IP68
OPERATING TEMP -40C ~ +150C
WEIGHT 2.250kg

What's Included

  • ST3303 PRO 24 LED 18.4 Inch Light Bar
  • Easy Fit High Beam Wiring Harness with H4 & HB3 adapters to High Beam
  • 2 x Lower Mountings Brackets with Stainless Steel Fasteners
  • 2 x 4mm thick Stainless Steel Brackets
  • 2 x Orange End Caps
  • 2 x Grey End Caps

PURCHASE AND SHIPPING OPTION COMING SOON!

For Now CLICK & COLLECT ONLY.

 

CHANGES TO ORDERS

Once an order has been placed it is not able to be edited, added to or cancelled. Please contact sales@aussieoffroadmaitland.com.au for any further information.

ORDER DISPATCH

Once your order has been received we will contact you withing 24 hours with an estimated day your order will be ready for collection. You can then book a day and time that best suits you for collection.NOTE: Some items may take up to 14 days before available for collection

RETURNS

Aussie OffRoad Maitland may, at their sole discretion, provide a refund on the return of the Products within 30 days where the Product packaging is unopened and remains in a saleable condition. You acknowledge and agree that you are liable for any postage and shipping costs associated with any refund pursuant to this clause. Where refunds are granted these will be credited to the credit card used for purchase or to your PayPal account.For further information on returns sales@aussieoffroadmaitland.com.au

RETURNS POLICY

We recommend professional installation. If the product is damaged during installation, we are not responsible and will not issue a refund.

  • Before any returns or exchanges, please contact us with your item ID and reason for return/exchange.
  • When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation - contact us if there is any damage.
  • We do not accept returns if buyer has changed their mind, there must be a genuine problem with the item for us to consider a refund.
  • Minor scratches will not be considered as manufacturer defect.
  • All items need to be returned to OUR Maitland Warehouse
  • We will only process the refund after the item is received and inspected by us.
  • Item should be returned in original packaging and with all accessories. If any of it is missing or damage during freight we will deduct from the refund.
  • Shipping is non-refundable.
  • Return shipping is payable by the buyer.
  • If returning an item you must contact us within 30 days of receiving purchase to get your return code and items must be received within 10 days of contacting us. 

LAY-BY

Aussie OffRoad offer a 3 month lay-by on certain products, if there is a long lead time for delivery. The item needs to be paid in full and picked up within 3 months from the date of purchase. Any lay-by that misses the 3 month mark will still have the option to pay off the invoice and pick up the item, if you choose to cancel, all monies paid will be deemed a non-refundable deposit.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)