Dual Connector Plug & Play SMART Harness™ High Beam Driving Light Wiring Dual Connector Plug & Play SMART Harness™ High Beam Driving Light Wiring Stedi THE DEVIL IS IN THE DETAILS. While others claim to be 'universally compatible' with both positive and negative switched vehicles, it doesn't take long to see that this is not the case. The STEDI SMART Harness is unique, in that it has a built-in microprocessor which deals with even the most complex vehicle wiring systems. Our aim was to create a stress-free installation process, with peace of mind of knowing it will all come together in the end. BRIDGING THE GAP. Whether your driving lights use the popular DT or DTP connectors, our SMART Harness caters for both by providing a cross-compatibility platform that will lay any confusion to rest. Dual output allows for running anything from a single to dual slim LED Lightbar to a set of high-performance LED Spot Lights like our STEDI Type-X. ADR COMPLIANT. 100% Plug & Play, no splicing or grafting required, our SMART Harness will install straight to your vehicle hassle-free triggering straight from your vehicle's high beam. With an all-new waterproof switch for open cabin application, included HB3 + H4 Piggy Back adaptors fitting most vehicles factory headlights with H1, H7 & H9 also available; this is your all-in-one wiring solution. The NittyGritty. Dual Output Quick Fit SMART Harness | Our all-in-one wiring loom Our all-new Plug & Play SMART Harnessu2122 for Quick Fit installation of your driving lights. Incredible High Current 10AWG cable, negative switch compatible, waterproof switch & DTP to DT Reducers bridging the compatibility between the two connector types. Our SMART Harness has been designed around the consumer to simplify the installation process. The supplied HB3 and H4 Adapters trigger your driving lights from your high beam without cutting or soldering any wiring. Simply unplug your HB3 or H4 connector at the back of your headlight's bulb, plug in our adapter, and you're done! Driving lights will only trigger from a high beam, and the switch will act solely as an isolator. Our new SMART Harness has a built-in microprocessor that automatically detects whether your system is positive or negative switched, and will work right out of the box without any modification whatsoever. Toyota's, Ford Ranger, Mazda BT50 among many other popular 4x4 are notorious for being very difficult and costly to wire driving lights to high beam, our quick fit harness takes all the guesswork out of it. It contains everything you need to get your lights connected: ON/OFF Switch, 60A Relay, 35A Fuse, ribbed cable protectors, heat shrink wrapped relay, DTP to DT Reducers. Featuring a total of 4.8 meters of wiring (full stretched out) 2.4m of cabling from Relay to Switch 2.0m of cabling from Driving Light connector to Relay 2.0m from H4 or HB3 Adapter to Relay Total cable length 6.4m 12vDC 35A Rated Fuse Kit 12vDC 60A Switching Relay Push Button ON/OFF Switch UV Rated Insulation Instruction included. HB3 & H4 are the most common wiring connectors found in most popular makes and models. If your car does not use H4 or HB3, this wiring harness can still be used to connect to a high beam. We also sell separately H1, H9 & H7, as well as vehicle-specific adaptors for the Amarok, 200 series Landcruiser, MQ & MR Triton, Isuzu M-UX / D-Max, Ranger / Raptor PX2 & PX3 7 Holden Colorado.   Tech Specs WIRING RATING 12vDC 35A RELAY RATING 12vDC 60A FUSE 35A CONNECTOR DT & DTP INSTRUCTIONS Included MAX LOAD 35A @12v INCLUDED PIGGYBACK HB3 & H4 What's Included 1 x STEDISMART Harnessu2122 Dual Output with DTP connector DTP to DT Reducers HB3 + H4 Piggy Back Adaptors Waterproof Switch Instruction Leaflet

Dual Connector Plug & Play SMART Harness™ High Beam Driving Light Wiring

Code: WIRQKFT-SMART
$59.99
In Stock
Add to Wishlist
  • OPEN PAY AVAILABLE

  • GURANTEED PARTS FIT

  • INTERSTATE DELIVERY

THE DEVIL IS IN THE DETAILS.

While others claim to be 'universally compatible' with both positive and negative switched vehicles, it doesn't take long to see that this is not the case. The STEDI SMART Harness is unique, in that it has a built-in microprocessor which deals with even the most complex vehicle wiring systems. Our aim was to create a stress-free installation process, with peace of mind of knowing it will all come together in the end.

BRIDGING THE GAP.

Whether your driving lights use the popular DT or DTP connectors, our SMART Harness caters for both by providing a cross-compatibility platform that will lay any confusion to rest. Dual output allows for running anything from a single to dual slim LED Lightbar to a set of high-performance LED Spot Lights like our STEDI Type-X.

ADR COMPLIANT.

100% Plug & Play, no splicing or grafting required, our SMART Harness will install straight to your vehicle hassle-free triggering straight from your vehicle's high beam. With an all-new waterproof switch for open cabin application, included HB3 + H4 Piggy Back adaptors fitting most vehicles factory headlights with H1, H7 & H9 also available; this is your all-in-one wiring solution.

The Nitty
Gritty.

Dual Output Quick Fit SMART Harness | Our all-in-one wiring loom

Our all-new Plug & Play SMART Harnessu2122 for Quick Fit installation of your driving lights. Incredible High Current 10AWG cable, negative switch compatible, waterproof switch & DTP to DT Reducers bridging the compatibility between the two connector types. Our SMART Harness has been designed around the consumer to simplify the installation process.

The supplied HB3 and H4 Adapters trigger your driving lights from your high beam without cutting or soldering any wiring. Simply unplug your HB3 or H4 connector at the back of your headlight's bulb, plug in our adapter, and you're done! Driving lights will only trigger from a high beam, and the switch will act solely as an isolator.

Our new SMART Harness has a built-in microprocessor that automatically detects whether your system is positive or negative switched, and will work right out of the box without any modification whatsoever. Toyota's, Ford Ranger, Mazda BT50 among many other popular 4x4 are notorious for being very difficult and costly to wire driving lights to high beam, our quick fit harness takes all the guesswork out of it.

It contains everything you need to get your lights connected: ON/OFF Switch, 60A Relay, 35A Fuse, ribbed cable protectors, heat shrink wrapped relay, DTP to DT Reducers.

  • Featuring a total of 4.8 meters of wiring (full stretched out)
  • 2.4m of cabling from Relay to Switch
  • 2.0m of cabling from Driving Light connector to Relay
  • 2.0m from H4 or HB3 Adapter to Relay
  • Total cable length 6.4m
  • 12vDC 35A Rated Fuse Kit
  • 12vDC 60A Switching Relay
  • Push Button ON/OFF Switch
  • UV Rated Insulation
  • Instruction included.

HB3 & H4 are the most common wiring connectors found in most popular makes and models. If your car does not use H4 or HB3, this wiring harness can still be used to connect to a high beam. We also sell separately H1, H9 & H7, as well as vehicle-specific adaptors for the Amarok, 200 series Landcruiser, MQ & MR Triton, Isuzu M-UX / D-Max, Ranger / Raptor PX2 & PX3 7 Holden Colorado.

 

Tech Specs

WIRING RATING 12vDC 35A
RELAY RATING 12vDC 60A
FUSE 35A
CONNECTOR DT & DTP
INSTRUCTIONS Included
MAX LOAD 35A @12v
INCLUDED PIGGYBACK HB3 & H4

What's Included

  • 1 x STEDISMART Harnessu2122
  • Dual Output with DTP connector
  • DTP to DT Reducers
  • HB3 + H4 Piggy Back Adaptors
  • Waterproof Switch
  • Instruction Leaflet

THE DEVIL IS IN THE DETAILS.

While others claim to be 'universally compatible' with both positive and negative switched vehicles, it doesn't take long to see that this is not the case. The STEDI SMART Harness is unique, in that it has a built-in microprocessor which deals with even the most complex vehicle wiring systems. Our aim was to create a stress-free installation process, with peace of mind of knowing it will all come together in the end.

BRIDGING THE GAP.

Whether your driving lights use the popular DT or DTP connectors, our SMART Harness caters for both by providing a cross-compatibility platform that will lay any confusion to rest. Dual output allows for running anything from a single to dual slim LED Lightbar to a set of high-performance LED Spot Lights like our STEDI Type-X.

ADR COMPLIANT.

100% Plug & Play, no splicing or grafting required, our SMART Harness will install straight to your vehicle hassle-free triggering straight from your vehicle's high beam. With an all-new waterproof switch for open cabin application, included HB3 + H4 Piggy Back adaptors fitting most vehicles factory headlights with H1, H7 & H9 also available; this is your all-in-one wiring solution.

The Nitty
Gritty.

Dual Output Quick Fit SMART Harness | Our all-in-one wiring loom

Our all-new Plug & Play SMART Harnessu2122 for Quick Fit installation of your driving lights. Incredible High Current 10AWG cable, negative switch compatible, waterproof switch & DTP to DT Reducers bridging the compatibility between the two connector types. Our SMART Harness has been designed around the consumer to simplify the installation process.

The supplied HB3 and H4 Adapters trigger your driving lights from your high beam without cutting or soldering any wiring. Simply unplug your HB3 or H4 connector at the back of your headlight's bulb, plug in our adapter, and you're done! Driving lights will only trigger from a high beam, and the switch will act solely as an isolator.

Our new SMART Harness has a built-in microprocessor that automatically detects whether your system is positive or negative switched, and will work right out of the box without any modification whatsoever. Toyota's, Ford Ranger, Mazda BT50 among many other popular 4x4 are notorious for being very difficult and costly to wire driving lights to high beam, our quick fit harness takes all the guesswork out of it.

It contains everything you need to get your lights connected: ON/OFF Switch, 60A Relay, 35A Fuse, ribbed cable protectors, heat shrink wrapped relay, DTP to DT Reducers.

  • Featuring a total of 4.8 meters of wiring (full stretched out)
  • 2.4m of cabling from Relay to Switch
  • 2.0m of cabling from Driving Light connector to Relay
  • 2.0m from H4 or HB3 Adapter to Relay
  • Total cable length 6.4m
  • 12vDC 35A Rated Fuse Kit
  • 12vDC 60A Switching Relay
  • Push Button ON/OFF Switch
  • UV Rated Insulation
  • Instruction included.

HB3 & H4 are the most common wiring connectors found in most popular makes and models. If your car does not use H4 or HB3, this wiring harness can still be used to connect to a high beam. We also sell separately H1, H9 & H7, as well as vehicle-specific adaptors for the Amarok, 200 series Landcruiser, MQ & MR Triton, Isuzu M-UX / D-Max, Ranger / Raptor PX2 & PX3 7 Holden Colorado.

 

Tech Specs

WIRING RATING 12vDC 35A
RELAY RATING 12vDC 60A
FUSE 35A
CONNECTOR DT & DTP
INSTRUCTIONS Included
MAX LOAD 35A @12v
INCLUDED PIGGYBACK HB3 & H4

What's Included

  • 1 x STEDISMART Harnessu2122
  • Dual Output with DTP connector
  • DTP to DT Reducers
  • HB3 + H4 Piggy Back Adaptors
  • Waterproof Switch
  • Instruction Leaflet

PURCHASE AND SHIPPING OPTION COMING SOON!

For Now CLICK & COLLECT ONLY.

 

CHANGES TO ORDERS

Once an order has been placed it is not able to be edited, added to or cancelled. Please contact sales@aussieoffroadmaitland.com.au for any further information.

ORDER DISPATCH

Once your order has been received we will contact you withing 24 hours with an estimated day your order will be ready for collection. You can then book a day and time that best suits you for collection.NOTE: Some items may take up to 14 days before available for collection

RETURNS

Aussie OffRoad Maitland may, at their sole discretion, provide a refund on the return of the Products within 30 days where the Product packaging is unopened and remains in a saleable condition. You acknowledge and agree that you are liable for any postage and shipping costs associated with any refund pursuant to this clause. Where refunds are granted these will be credited to the credit card used for purchase or to your PayPal account.For further information on returns sales@aussieoffroadmaitland.com.au

RETURNS POLICY

We recommend professional installation. If the product is damaged during installation, we are not responsible and will not issue a refund.

  • Before any returns or exchanges, please contact us with your item ID and reason for return/exchange.
  • When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation - contact us if there is any damage.
  • We do not accept returns if buyer has changed their mind, there must be a genuine problem with the item for us to consider a refund.
  • Minor scratches will not be considered as manufacturer defect.
  • All items need to be returned to OUR Maitland Warehouse
  • We will only process the refund after the item is received and inspected by us.
  • Item should be returned in original packaging and with all accessories. If any of it is missing or damage during freight we will deduct from the refund.
  • Shipping is non-refundable.
  • Return shipping is payable by the buyer.
  • If returning an item you must contact us within 30 days of receiving purchase to get your return code and items must be received within 10 days of contacting us. 

LAY-BY

Aussie OffRoad offer a 3 month lay-by on certain products, if there is a long lead time for delivery. The item needs to be paid in full and picked up within 3 months from the date of purchase. Any lay-by that misses the 3 month mark will still have the option to pay off the invoice and pick up the item, if you choose to cancel, all monies paid will be deemed a non-refundable deposit.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)