Micro ST3520 7.3" 18w LED Work Light Micro ST3520 7.3" 18w LED Work Light Stedi OVERVIEW. Our lowest profile LED Light bar with a total height of only 26mm is perfect for those looking for a combo beam but running tight on space or looking to keep the factory look to their vehicle. Available in 3 different sizes to fit any application, our ST3520 Micro is the easy choice when looking for that bit of extra light. PERFORMANCE. The ST3520 is the perfect addition to an already powerful lighting setup or just looking for something to bring some light over your standard headlights. Running a combo beam so even if it's the only bar you run on your vehicle you're provided with good spot and flood beam. APPLICATION. These little puppies have one of the widest fields of usable application as they are quite nimble and light weight meaning they can pretty much be mounted anywhere you need without needing to be heavily supported by the structure of the car weighing in at only 0.300kgs for the 7.3 inch bar. The Nitty Gritty. KEY FEATURES AT A GLANCE IP67 Ingress Protection 6 x 3 Watt CREE LED Micro Profile at only 26mm Flood Beam - Perfect Rear Light, Awning Light or bumper or bull bar voids. Waterproof Deutsch Connectors Male and Female with wire tails If mounting to a vertical surface, the included mounts may not provide adequate rotation to angle the light down - Our optional ST3K side bracket (SKU:BRKST3K-SDE) work magnificently. Tech Specs LED Power Output 18 WATT Raw Lumens 1854Lm Operating Voltage 10-30V DC Current Draw 0.9a @ 13.6v :LED CHIP 6 x 3w CREE XBD LED Colour Temperature 6000k Material Die Cast Aluminum Housing Lens PC Lens Mounting Bracket Aluminum Fasteners Stainless Steel Beam Type Flood Life Span 50000 Hours Weight .3kg Waterproof Rate IP67 What's Included 1 x 18W 7.3inch Micro Bar Stainless Steel Fasteners Mounting Brackets

Micro ST3520 7.3" 18w LED Work Light

Code: LED3520-7-18W
$35.00
In Stock
Add to Wishlist
Category: Lights, Products, Stedi
  • OPEN PAY AVAILABLE

  • GURANTEED PARTS FIT

  • INTERSTATE DELIVERY

OVERVIEW.

Our lowest profile LED Light bar with a total height of only 26mm is perfect for those looking for a combo beam but running tight on space or looking to keep the factory look to their vehicle. Available in 3 different sizes to fit any application, our ST3520 Micro is the easy choice when looking for that bit of extra light.

PERFORMANCE.

The ST3520 is the perfect addition to an already powerful lighting setup or just looking for something to bring some light over your standard headlights. Running a combo beam so even if it's the only bar you run on your vehicle you're provided with good spot and flood beam.

APPLICATION.

These little puppies have one of the widest fields of usable application as they are quite nimble and light weight meaning they can pretty much be mounted anywhere you need without needing to be heavily supported by the structure of the car weighing in at only 0.300kgs for the 7.3 inch bar.

The Nitty Gritty.

KEY FEATURES AT A GLANCE

  • IP67 Ingress Protection
  • 6 x 3 Watt CREE LED
  • Micro Profile at only 26mm
  • Flood Beam - Perfect Rear Light, Awning Light or bumper or bull bar voids.
  • Waterproof Deutsch Connectors Male and Female with wire tails

If mounting to a vertical surface, the included mounts may not provide adequate rotation to angle the light down - Our optional ST3K side bracket (SKU:BRKST3K-SDE) work magnificently.

Tech Specs

LED Power Output 18 WATT
Raw Lumens 1854Lm
Operating Voltage 10-30V DC
Current Draw 0.9a @ 13.6v
:LED CHIP 6 x 3w CREE XBD LED
Colour Temperature 6000k
Material Die Cast Aluminum Housing
Lens PC Lens
Mounting Bracket Aluminum
Fasteners Stainless Steel
Beam Type Flood
Life Span 50000 Hours
Weight .3kg
Waterproof Rate IP67

What's Included

  • 1 x 18W 7.3inch Micro Bar
  • Stainless Steel Fasteners
  • Mounting Brackets

OVERVIEW.

Our lowest profile LED Light bar with a total height of only 26mm is perfect for those looking for a combo beam but running tight on space or looking to keep the factory look to their vehicle. Available in 3 different sizes to fit any application, our ST3520 Micro is the easy choice when looking for that bit of extra light.

PERFORMANCE.

The ST3520 is the perfect addition to an already powerful lighting setup or just looking for something to bring some light over your standard headlights. Running a combo beam so even if it's the only bar you run on your vehicle you're provided with good spot and flood beam.

APPLICATION.

These little puppies have one of the widest fields of usable application as they are quite nimble and light weight meaning they can pretty much be mounted anywhere you need without needing to be heavily supported by the structure of the car weighing in at only 0.300kgs for the 7.3 inch bar.

The Nitty Gritty.

KEY FEATURES AT A GLANCE

  • IP67 Ingress Protection
  • 6 x 3 Watt CREE LED
  • Micro Profile at only 26mm
  • Flood Beam - Perfect Rear Light, Awning Light or bumper or bull bar voids.
  • Waterproof Deutsch Connectors Male and Female with wire tails

If mounting to a vertical surface, the included mounts may not provide adequate rotation to angle the light down - Our optional ST3K side bracket (SKU:BRKST3K-SDE) work magnificently.

Tech Specs

LED Power Output 18 WATT
Raw Lumens 1854Lm
Operating Voltage 10-30V DC
Current Draw 0.9a @ 13.6v
:LED CHIP 6 x 3w CREE XBD LED
Colour Temperature 6000k
Material Die Cast Aluminum Housing
Lens PC Lens
Mounting Bracket Aluminum
Fasteners Stainless Steel
Beam Type Flood
Life Span 50000 Hours
Weight .3kg
Waterproof Rate IP67

What's Included

  • 1 x 18W 7.3inch Micro Bar
  • Stainless Steel Fasteners
  • Mounting Brackets

PURCHASE AND SHIPPING OPTION COMING SOON!

For Now CLICK & COLLECT ONLY.

 

CHANGES TO ORDERS

Once an order has been placed it is not able to be edited, added to or cancelled. Please contact sales@aussieoffroadmaitland.com.au for any further information.

ORDER DISPATCH

Once your order has been received we will contact you withing 24 hours with an estimated day your order will be ready for collection. You can then book a day and time that best suits you for collection.NOTE: Some items may take up to 14 days before available for collection

RETURNS

Aussie OffRoad Maitland may, at their sole discretion, provide a refund on the return of the Products within 30 days where the Product packaging is unopened and remains in a saleable condition. You acknowledge and agree that you are liable for any postage and shipping costs associated with any refund pursuant to this clause. Where refunds are granted these will be credited to the credit card used for purchase or to your PayPal account.For further information on returns sales@aussieoffroadmaitland.com.au

RETURNS POLICY

We recommend professional installation. If the product is damaged during installation, we are not responsible and will not issue a refund.

  • Before any returns or exchanges, please contact us with your item ID and reason for return/exchange.
  • When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation - contact us if there is any damage.
  • We do not accept returns if buyer has changed their mind, there must be a genuine problem with the item for us to consider a refund.
  • Minor scratches will not be considered as manufacturer defect.
  • All items need to be returned to OUR Maitland Warehouse
  • We will only process the refund after the item is received and inspected by us.
  • Item should be returned in original packaging and with all accessories. If any of it is missing or damage during freight we will deduct from the refund.
  • Shipping is non-refundable.
  • Return shipping is payable by the buyer.
  • If returning an item you must contact us within 30 days of receiving purchase to get your return code and items must be received within 10 days of contacting us. 

LAY-BY

Aussie OffRoad offer a 3 month lay-by on certain products, if there is a long lead time for delivery. The item needs to be paid in full and picked up within 3 months from the date of purchase. Any lay-by that misses the 3 month mark will still have the option to pay off the invoice and pick up the item, if you choose to cancel, all monies paid will be deemed a non-refundable deposit.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)