Ford Rally Bar | Light Mounting Bracket Ford Rally Bar | Light Mounting Bracket Stedi The Nudge Bar Re-Imagined. We take pride in our ability to improve on factory-made accessories to deliver a product of superior performance. Enter the STEDI Rally Bar. Featuring a large 63mm diameter, ergonomically designed tube made out of durable 2mm stainless steel, this lightweight nudge bar can securely hold up to 30kg without any compromise. Fits Like A Glove. The STEDI Rally Bar is designed for a seamless fully reversible and non-intrusive install (grill dependent). So you can forget about any hassling setups and vehicle modifications. Once installed, you can expect a higher mounting position than the factory counterpart and the optimal setup for a killer lighting combination. With slick styling and the perfect compatibility for the STEDI product range, our Rally Bar will seamlessly uphold your expectations while loudly showcasing the quintessential quality of STEDI. Partner In Crime. The STEDI Rally Bar is a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination. The NittyGritty. Rally Bar | The Ford Nudge Re-imagined by STEDI. Enter the STEDI Rally Bar. Featuring a stainless steel front tube with a thickness of 2mm, this lightweight yet durable nudge bar can securely hold up to 30kg without any compromise. The STEDI Rally Bar also provides a higher mounting position than the factory counterpart, offering stronger protection of your vehicle, while also allowing for a killer lighting combination. With a slick styling and the optimal compatibility for the STEDI product range, our Rally Bar is the perfect addition to your Ford Ranger. The STEDI Rally Bar is a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination. To suit Ford Ranger PX2, PX3, Raptor and Everest. Tech Specs HOLDING CAPACITY 30kg MATERIAL Stainless steel (front tube) THICKNESS 2mm DIAMETER 60mm

Ford Rally Bar | Light Mounting Bracket

Code: FORD-RANGER-NUDGE
$349.99
In Stock
Add to Wishlist
  • OPEN PAY AVAILABLE

  • GURANTEED PARTS FIT

  • INTERSTATE DELIVERY

The Nudge Bar Re-Imagined.

We take pride in our ability to improve on factory-made accessories to deliver a product of superior performance. Enter the STEDI Rally Bar. Featuring a large 63mm diameter, ergonomically designed tube made out of durable 2mm stainless steel, this lightweight nudge bar can securely hold up to 30kg without any compromise.

Fits Like A Glove.

The STEDI Rally Bar is designed for a seamless fully reversible and non-intrusive install (grill dependent). So you can forget about any hassling setups and vehicle modifications. Once installed, you can expect a higher mounting position than the factory counterpart and the optimal setup for a killer lighting combination. With slick styling and the perfect compatibility for the STEDI product range, our Rally Bar will seamlessly uphold your expectations while loudly showcasing the quintessential quality of STEDI.

Partner In Crime.

The STEDI Rally Bar is a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.

The Nitty
Gritty.

Rally Bar | The Ford Nudge Re-imagined by STEDI.

Enter the STEDI Rally Bar.

Featuring a stainless steel front tube with a thickness of 2mm, this lightweight yet durable nudge bar can securely hold up to 30kg without any compromise. The STEDI Rally Bar also provides a higher mounting position than the factory counterpart, offering stronger protection of your vehicle, while also allowing for a killer lighting combination. With a slick styling and the optimal compatibility for the STEDI product range, our Rally Bar is the perfect addition to your Ford Ranger.

The STEDI Rally Bar is a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.

To suit Ford Ranger PX2, PX3, Raptor and Everest.

Tech Specs

HOLDING CAPACITY

30kg
MATERIAL

Stainless steel (front tube)
THICKNESS 2mm
DIAMETER 60mm


The Nudge Bar Re-Imagined.

We take pride in our ability to improve on factory-made accessories to deliver a product of superior performance. Enter the STEDI Rally Bar. Featuring a large 63mm diameter, ergonomically designed tube made out of durable 2mm stainless steel, this lightweight nudge bar can securely hold up to 30kg without any compromise.

Fits Like A Glove.

The STEDI Rally Bar is designed for a seamless fully reversible and non-intrusive install (grill dependent). So you can forget about any hassling setups and vehicle modifications. Once installed, you can expect a higher mounting position than the factory counterpart and the optimal setup for a killer lighting combination. With slick styling and the perfect compatibility for the STEDI product range, our Rally Bar will seamlessly uphold your expectations while loudly showcasing the quintessential quality of STEDI.

Partner In Crime.

The STEDI Rally Bar is a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.

The Nitty
Gritty.

Rally Bar | The Ford Nudge Re-imagined by STEDI.

Enter the STEDI Rally Bar.

Featuring a stainless steel front tube with a thickness of 2mm, this lightweight yet durable nudge bar can securely hold up to 30kg without any compromise. The STEDI Rally Bar also provides a higher mounting position than the factory counterpart, offering stronger protection of your vehicle, while also allowing for a killer lighting combination. With a slick styling and the optimal compatibility for the STEDI product range, our Rally Bar is the perfect addition to your Ford Ranger.

The STEDI Rally Bar is a perfect match for our 60mm - 66mm HEX Bull Bar Tube Mounting Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.

To suit Ford Ranger PX2, PX3, Raptor and Everest.

Tech Specs

HOLDING CAPACITY

30kg
MATERIAL

Stainless steel (front tube)
THICKNESS 2mm
DIAMETER 60mm


PURCHASE AND SHIPPING OPTION COMING SOON!

For Now CLICK & COLLECT ONLY.

 

CHANGES TO ORDERS

Once an order has been placed it is not able to be edited, added to or cancelled. Please contact sales@aussieoffroadmaitland.com.au for any further information.

ORDER DISPATCH

Once your order has been received we will contact you withing 24 hours with an estimated day your order will be ready for collection. You can then book a day and time that best suits you for collection.NOTE: Some items may take up to 14 days before available for collection

RETURNS

Aussie OffRoad Maitland may, at their sole discretion, provide a refund on the return of the Products within 30 days where the Product packaging is unopened and remains in a saleable condition. You acknowledge and agree that you are liable for any postage and shipping costs associated with any refund pursuant to this clause. Where refunds are granted these will be credited to the credit card used for purchase or to your PayPal account.For further information on returns sales@aussieoffroadmaitland.com.au

RETURNS POLICY

We recommend professional installation. If the product is damaged during installation, we are not responsible and will not issue a refund.

  • Before any returns or exchanges, please contact us with your item ID and reason for return/exchange.
  • When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation - contact us if there is any damage.
  • We do not accept returns if buyer has changed their mind, there must be a genuine problem with the item for us to consider a refund.
  • Minor scratches will not be considered as manufacturer defect.
  • All items need to be returned to OUR Maitland Warehouse
  • We will only process the refund after the item is received and inspected by us.
  • Item should be returned in original packaging and with all accessories. If any of it is missing or damage during freight we will deduct from the refund.
  • Shipping is non-refundable.
  • Return shipping is payable by the buyer.
  • If returning an item you must contact us within 30 days of receiving purchase to get your return code and items must be received within 10 days of contacting us. 

LAY-BY

Aussie OffRoad offer a 3 month lay-by on certain products, if there is a long lead time for delivery. The item needs to be paid in full and picked up within 3 months from the date of purchase. Any lay-by that misses the 3 month mark will still have the option to pay off the invoice and pick up the item, if you choose to cancel, all monies paid will be deemed a non-refundable deposit.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)