Safari Snorkel - Mitsubishi Pajero NS All Engines Safari Snorkel - Mitsubishi Pajero NS All Engines Safari Snorkel OVERVIEW Safari Snorkel TheSS41HF Mitsubishi Pajero 4x4 Snorkel is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly ofNS All engines. With the huge air flow demands of each engine in the Mitsubishi NS Pajero, Safari took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner. Huge air flow is but one aspect of the ultimate in snorkelMitsubishi Pajero design. The Safari snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms. The genuineSafariMitsubishi Pajero 4x4 Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that theMitsubishi Pajero snorkel breezes through the toughest off-road conditions on the planet. *(Exceed requires additional washer bottle) FEATURES SafariMitsubishi Pajero 4x4 Snorkel Features Safari Automotive Australian designed, molded and manufactured Raised air intake to prevent your engine from ingesting harmful elements Increased airflow for yourPajero NS engine Water separating air ram design to remove water from the air stream Durable and UV stable snorkel and air ram for added strength ComprehensiveMitsubishi Pajero 4WD Snorkel fitting guide with an accurate template for assisting with installation. PARTS SafariSnorkelMitsubishi Pajero 4x4 Kit - Parts List Mitsubishi Pajero4WD Snorkel forNS All Engine Models -Safari AutomotiveMitsubishi Pajero 4x4 Snorkel Part Number SS41HF *(Exceed requires additional washer bottle) Actual model not shown. ITEM PART NO. DESCRIPTION QTY 1 570-133-200 BODY - SNORKEL (SS41HF) 1 2 000-135-800 3 u00bd" AIR RAM ASSEMBLY 1 3 570-032-000 BRACKET - UPPER MOUNTING 1 4 000-960 INSERT - PLASTIC 3 5 000-951-300 SCREW - S/T 4.2mm x 16mm 3 6 000-002-100 BOLT - HEX 6mm x 1.0mm x 14mm (SEMS) 3 7 000-110 STUD - S/S 8mm x 1.25mm x 25mm O/L 3 8 000-352 WASHER - 8.5mm x 45mm x 1.6mm 3 9 000-378 WASHER - RUBBER - 8.5 x 45 x 3mm 3 10 000-205-300 NUT - NYLOC 8mm x 1.25 - S/S 3 11 000-1913 CLAMP - HOSE - 120/140mm 1 12 570-024-800 HOSE - INNER GUARD (REAR) 1 13 485-025-000 JOINER - 90mm OD x 60mm LONG 1 14 570-024-850 HOSE - INNER GUARD (FRONT) 1 15 000-909 CLAMP - HOSE - 80/100mm 3 16 570-532-000 BRACKET - HOSE SUPPORT 1 17 565-123-000 DUCT - AIR CLEANER ENTRY (SS35HF) 1 18 000-987-550 CABLE - TIE 8mm x 500mm 1 19 000-958-400 POP RIVET - 4.8mm x 21mm 1 20 565-017-100 FIXTURE - HOLESAW CENTRE 1 21 000-958 POP RIVET - 4mm x 12mm 2 22 565-031-000 BRACKET - AIR CLEANER RELOCATION 1 23 565-031-100 BRACKET - AIR CLEANER RELOCATION 1 24 000-335 WASHER - BODY 8mm x 24mm x 3mm 3 25 000-039-300 BOLT - B/H SOCKET SCREW - 6mm x 16mm 3 26 570-704-000 PLATE - INDICATOR BLANK-OFF 1 27 000-914/B HOSE CLAMP - SIZE 56 (BLACK) 1 28 570-016-200 GASKET - FOAM BODY (SELF ADHESIVE) 1 29 570-017-200 TEMPLATE - GUARD PANEL 1 30 570-098-200 WASHER BOTTLE - PLASTIC 1 31 570-096-000 BRACKET - WASHER BOTTLE MOUNTING 1 32 570-096-100 CLAMP - WASHER BOTTLE MOUNTING 1 33 570-096-200 BRACKET - WASHER BOTTLE SUPPORT 1 34 000-003 BOLT - HEX - 6mm x 1.0 x 20mm 2 35 000-304 WASHER - STAR - 6mm - S/S 2 36 000-321 WASHER - BODY - 6mm x 20mm 2 37 000-003-100 BOLT - HEX - 6mm x 20mm (SEMS) 1 38 000-021 BOLT - HEX - 5mm x 0.8 x 12mm 2 39 000-320 WASHER - FLAT - 5mm 4 40 000-221 NUT - NYLOC - 5mm x 0.8 2 41 000-987-100 CABLE TIE - 2.5mm x 100mm 8 42 000-979 CONNECTOR - STRAIGHT - 5.0mm 1 43 000-826-130 HOSE - WINDSCREEN WASHER - 4mm ID x 1300mm 1 44 570-083-000 LOOM - WASHER BOTTLE MOTOR EXTENSION 1 45 000-987-178 CABLE TIE - 4.5mm x 180mm 2 make-mitsubishi,make-mitsubishi-model-pajero

Safari Snorkel - Mitsubishi Pajero NS All Engines

Code: SS41HF
$567.00
In Stock
Add to Wishlist
  • OPEN PAY AVAILABLE

  • GURANTEED PARTS FIT

  • INTERSTATE DELIVERY

OVERVIEW

Safari Snorkel

TheSS41HF Mitsubishi Pajero 4x4 Snorkel is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly ofNS All engines.

With the huge air flow demands of each engine in the Mitsubishi NS Pajero, Safari took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner.

Huge air flow is but one aspect of the ultimate in snorkelMitsubishi Pajero design. The Safari snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.

The genuineSafariMitsubishi Pajero 4x4 Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that theMitsubishi Pajero snorkel breezes through the toughest off-road conditions on the planet.

*(Exceed requires additional washer bottle)

FEATURES

SafariMitsubishi Pajero 4x4 Snorkel Features

  • Safari Automotive Australian designed, molded and manufactured
  • Raised air intake to prevent your engine from ingesting harmful elements
  • Increased airflow for yourPajero NS engine
  • Water separating air ram design to remove water from the air stream
  • Durable and UV stable snorkel and air ram for added strength
  • ComprehensiveMitsubishi Pajero 4WD Snorkel fitting guide with an accurate template for assisting with installation.

PARTS

SafariSnorkelMitsubishi Pajero 4x4 Kit - Parts List

Mitsubishi Pajero4WD Snorkel forNS All Engine Models -Safari AutomotiveMitsubishi Pajero 4x4 Snorkel Part Number SS41HF

*(Exceed requires additional washer bottle)

Actual model not shown.

ITEM PART NO.
DESCRIPTION
QTY
1 570-133-200 BODY - SNORKEL (SS41HF) 1
2 000-135-800 3 u00bd" AIR RAM ASSEMBLY 1
3 570-032-000 BRACKET - UPPER MOUNTING 1
4 000-960 INSERT - PLASTIC 3
5 000-951-300 SCREW - S/T 4.2mm x 16mm 3
6 000-002-100 BOLT - HEX 6mm x 1.0mm x 14mm (SEMS) 3
7 000-110 STUD - S/S 8mm x 1.25mm x 25mm O/L 3
8 000-352 WASHER - 8.5mm x 45mm x 1.6mm 3
9 000-378 WASHER - RUBBER - 8.5 x 45 x 3mm 3
10 000-205-300 NUT - NYLOC 8mm x 1.25 - S/S 3
11 000-1913 CLAMP - HOSE - 120/140mm 1
12 570-024-800 HOSE - INNER GUARD (REAR) 1
13 485-025-000 JOINER - 90mm OD x 60mm LONG 1
14 570-024-850 HOSE - INNER GUARD (FRONT) 1
15 000-909 CLAMP - HOSE - 80/100mm 3
16 570-532-000 BRACKET - HOSE SUPPORT 1
17 565-123-000 DUCT - AIR CLEANER ENTRY (SS35HF) 1
18 000-987-550 CABLE - TIE 8mm x 500mm 1
19 000-958-400 POP RIVET - 4.8mm x 21mm 1
20 565-017-100 FIXTURE - HOLESAW CENTRE 1
21 000-958 POP RIVET - 4mm x 12mm 2
22 565-031-000 BRACKET - AIR CLEANER RELOCATION 1
23 565-031-100 BRACKET - AIR CLEANER RELOCATION 1
24 000-335 WASHER - BODY 8mm x 24mm x 3mm 3
25 000-039-300 BOLT - B/H SOCKET SCREW - 6mm x 16mm 3
26 570-704-000 PLATE - INDICATOR BLANK-OFF 1
27 000-914/B HOSE CLAMP - SIZE 56 (BLACK) 1
28 570-016-200 GASKET - FOAM BODY (SELF ADHESIVE) 1
29 570-017-200 TEMPLATE - GUARD PANEL 1
30 570-098-200 WASHER BOTTLE - PLASTIC 1
31 570-096-000 BRACKET - WASHER BOTTLE MOUNTING 1
32 570-096-100 CLAMP - WASHER BOTTLE MOUNTING 1
33 570-096-200 BRACKET - WASHER BOTTLE SUPPORT 1
34 000-003 BOLT - HEX - 6mm x 1.0 x 20mm 2
35 000-304 WASHER - STAR - 6mm - S/S 2
36 000-321 WASHER - BODY - 6mm x 20mm 2
37 000-003-100 BOLT - HEX - 6mm x 20mm (SEMS) 1
38 000-021 BOLT - HEX - 5mm x 0.8 x 12mm 2
39 000-320 WASHER - FLAT - 5mm 4
40 000-221 NUT - NYLOC - 5mm x 0.8 2
41 000-987-100 CABLE TIE - 2.5mm x 100mm 8
42 000-979 CONNECTOR - STRAIGHT - 5.0mm 1
43 000-826-130 HOSE - WINDSCREEN WASHER - 4mm ID x 1300mm 1
44 570-083-000 LOOM - WASHER BOTTLE MOTOR EXTENSION 1
45 000-987-178 CABLE TIE - 4.5mm x 180mm 2

OVERVIEW

Safari Snorkel

TheSS41HF Mitsubishi Pajero 4x4 Snorkel is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly ofNS All engines.

With the huge air flow demands of each engine in the Mitsubishi NS Pajero, Safari took the decision to design a snorkel system that raised the air intake to prevent ingesting harmful elements to the vehicles air cleaner.

Huge air flow is but one aspect of the ultimate in snorkelMitsubishi Pajero design. The Safari snorkel air ram is designed to perform two very important roles. The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms.

The genuineSafariMitsubishi Pajero 4x4 Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that theMitsubishi Pajero snorkel breezes through the toughest off-road conditions on the planet.

*(Exceed requires additional washer bottle)

FEATURES

SafariMitsubishi Pajero 4x4 Snorkel Features

  • Safari Automotive Australian designed, molded and manufactured
  • Raised air intake to prevent your engine from ingesting harmful elements
  • Increased airflow for yourPajero NS engine
  • Water separating air ram design to remove water from the air stream
  • Durable and UV stable snorkel and air ram for added strength
  • ComprehensiveMitsubishi Pajero 4WD Snorkel fitting guide with an accurate template for assisting with installation.

PARTS

SafariSnorkelMitsubishi Pajero 4x4 Kit - Parts List

Mitsubishi Pajero4WD Snorkel forNS All Engine Models -Safari AutomotiveMitsubishi Pajero 4x4 Snorkel Part Number SS41HF

*(Exceed requires additional washer bottle)

Actual model not shown.

ITEM PART NO.
DESCRIPTION
QTY
1 570-133-200 BODY - SNORKEL (SS41HF) 1
2 000-135-800 3 u00bd" AIR RAM ASSEMBLY 1
3 570-032-000 BRACKET - UPPER MOUNTING 1
4 000-960 INSERT - PLASTIC 3
5 000-951-300 SCREW - S/T 4.2mm x 16mm 3
6 000-002-100 BOLT - HEX 6mm x 1.0mm x 14mm (SEMS) 3
7 000-110 STUD - S/S 8mm x 1.25mm x 25mm O/L 3
8 000-352 WASHER - 8.5mm x 45mm x 1.6mm 3
9 000-378 WASHER - RUBBER - 8.5 x 45 x 3mm 3
10 000-205-300 NUT - NYLOC 8mm x 1.25 - S/S 3
11 000-1913 CLAMP - HOSE - 120/140mm 1
12 570-024-800 HOSE - INNER GUARD (REAR) 1
13 485-025-000 JOINER - 90mm OD x 60mm LONG 1
14 570-024-850 HOSE - INNER GUARD (FRONT) 1
15 000-909 CLAMP - HOSE - 80/100mm 3
16 570-532-000 BRACKET - HOSE SUPPORT 1
17 565-123-000 DUCT - AIR CLEANER ENTRY (SS35HF) 1
18 000-987-550 CABLE - TIE 8mm x 500mm 1
19 000-958-400 POP RIVET - 4.8mm x 21mm 1
20 565-017-100 FIXTURE - HOLESAW CENTRE 1
21 000-958 POP RIVET - 4mm x 12mm 2
22 565-031-000 BRACKET - AIR CLEANER RELOCATION 1
23 565-031-100 BRACKET - AIR CLEANER RELOCATION 1
24 000-335 WASHER - BODY 8mm x 24mm x 3mm 3
25 000-039-300 BOLT - B/H SOCKET SCREW - 6mm x 16mm 3
26 570-704-000 PLATE - INDICATOR BLANK-OFF 1
27 000-914/B HOSE CLAMP - SIZE 56 (BLACK) 1
28 570-016-200 GASKET - FOAM BODY (SELF ADHESIVE) 1
29 570-017-200 TEMPLATE - GUARD PANEL 1
30 570-098-200 WASHER BOTTLE - PLASTIC 1
31 570-096-000 BRACKET - WASHER BOTTLE MOUNTING 1
32 570-096-100 CLAMP - WASHER BOTTLE MOUNTING 1
33 570-096-200 BRACKET - WASHER BOTTLE SUPPORT 1
34 000-003 BOLT - HEX - 6mm x 1.0 x 20mm 2
35 000-304 WASHER - STAR - 6mm - S/S 2
36 000-321 WASHER - BODY - 6mm x 20mm 2
37 000-003-100 BOLT - HEX - 6mm x 20mm (SEMS) 1
38 000-021 BOLT - HEX - 5mm x 0.8 x 12mm 2
39 000-320 WASHER - FLAT - 5mm 4
40 000-221 NUT - NYLOC - 5mm x 0.8 2
41 000-987-100 CABLE TIE - 2.5mm x 100mm 8
42 000-979 CONNECTOR - STRAIGHT - 5.0mm 1
43 000-826-130 HOSE - WINDSCREEN WASHER - 4mm ID x 1300mm 1
44 570-083-000 LOOM - WASHER BOTTLE MOTOR EXTENSION 1
45 000-987-178 CABLE TIE - 4.5mm x 180mm 2

PURCHASE AND SHIPPING OPTION COMING SOON!

For Now CLICK & COLLECT ONLY.

 

CHANGES TO ORDERS

Once an order has been placed it is not able to be edited, added to or cancelled. Please contact sales@aussieoffroadmaitland.com.au for any further information.

ORDER DISPATCH

Once your order has been received we will contact you withing 24 hours with an estimated day your order will be ready for collection. You can then book a day and time that best suits you for collection.NOTE: Some items may take up to 14 days before available for collection

RETURNS

Aussie OffRoad Maitland may, at their sole discretion, provide a refund on the return of the Products within 30 days where the Product packaging is unopened and remains in a saleable condition. You acknowledge and agree that you are liable for any postage and shipping costs associated with any refund pursuant to this clause. Where refunds are granted these will be credited to the credit card used for purchase or to your PayPal account.For further information on returns sales@aussieoffroadmaitland.com.au

RETURNS POLICY

We recommend professional installation. If the product is damaged during installation, we are not responsible and will not issue a refund.

  • Before any returns or exchanges, please contact us with your item ID and reason for return/exchange.
  • When you have received your package, please inspect your product for any manufacturer defects or shipping damage prior to installation - contact us if there is any damage.
  • We do not accept returns if buyer has changed their mind, there must be a genuine problem with the item for us to consider a refund.
  • Minor scratches will not be considered as manufacturer defect.
  • All items need to be returned to OUR Maitland Warehouse
  • We will only process the refund after the item is received and inspected by us.
  • Item should be returned in original packaging and with all accessories. If any of it is missing or damage during freight we will deduct from the refund.
  • Shipping is non-refundable.
  • Return shipping is payable by the buyer.
  • If returning an item you must contact us within 30 days of receiving purchase to get your return code and items must be received within 10 days of contacting us. 

LAY-BY

Aussie OffRoad offer a 3 month lay-by on certain products, if there is a long lead time for delivery. The item needs to be paid in full and picked up within 3 months from the date of purchase. Any lay-by that misses the 3 month mark will still have the option to pay off the invoice and pick up the item, if you choose to cancel, all monies paid will be deemed a non-refundable deposit.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)